|
Precision Karting 972-243-0714 |
Machine Shop Services
Yamaha and European Motors
| Labor Only | Price |
| Hone Cylinder and Fit Piston | $25.00 |
| Lite Hone Cylinder, Brake Glaze | $10.00 |
| Bore Cylinder & Hone Cylinder | $75.00 |
| Square Bottom Cylinder with Bore of Cylinder | $45.00 |
| Blue Print Head | $45.00 |
| Square Cases with Center Line of Crank, Guaranteed .0002 TIR | $85.00 |
| Line Bore and Square Top and Bottom of Cases KT100 Yamaha. Done on Exchange basis, Guaranteed .0002 TIR | $275.00 |
| Machine Reed Manifold for Increased Flow | $75.00 |
| Port Exhaust and Intake, KT100 Yamaha | $125.00 |
| Port Exhaust and Intake, Reed Jet Type Motor | $425.00 |
| Port Exhaust and Intake Shifter Motor | $475.00 |
| Repair Broken Crankshaft Threads, European Motors | $150.00 |
Briggs
| Labor Only | Price |
| Blue Print Briggs Head | $25.00 |
| Line Bore and Hone Briggs Cylinder | $75.00 |
| Bronze Billet Guides Briggs | $10.00 ea. |
| Machine Block for Guides | $25.00 ea. |
| Install Billet Guide Center Drill, Drill, Ream Guide | $25.00 ea. |
| Cut Seat | $10.00 ea. |
| Grind Seat | $10.00 ea. |
| Lap, Polish, Seal Valves, Test to 100 PSI | $20.00 ea. |
| Machine Stock Crank, Install Tungsten for Improved Balance | $165.00 |
| True Flywheel to Crank | $40.00 |
| Blue Print Briggs Carburetor | $65.00 |
| Bore Briggs Carburetor for Outlaw Racing | $150.00 |
| Port Exhaust | $50.00 |
| Port Intake | $50.00 |
| Remove Old Seat, Bore, Install New Seat | $65.00 ea. |
| Sleeve Blocks | Call for Price |
Clutches
| Labor Only | Prices |
| Blue Print Motor Clutch | $150.00 |
| Blue Print Axle Clutch | $200.00 |
| Motor Clutch Blue Print Back Plate, Face and OD | $85.00 |
| Blue Print Pressure Plate, Face and OD | $65.00 |
| Axle Clutch Blue Print, Pressure Plate | $135.00 |
| Axle Clutch Blue Print Floaters | $20.00 ea. |
| Matched Springs for Motor and Axle Clutches | $25.00 set |
Prices subject to change without notice.
Prices are for labor only -- NO PARTS